Nokia 2366i - Additional safety information

background image

Additional safety information

Operating environment

Your device and its enhancements may contain small parts.
Keep them out of the reach of small children.

Remember to follow any special regulations in force in any area
and always switch off your device when its use is prohibited
or when it may cause interference or danger. Use the device
only in its normal operating positions. This device meets RF
exposure guidelines when used either in the normal use position
against the ear or when positioned at least 2.2 centimeters
(7/8 inch) away from the body. When a carry case, belt clip,
or holder is used for body-worn operation, it should not
contain metal and should position the device the above-stated
distance from your body.

To transmit data files or messages, this device requires a quality
connection to the network. In some cases, transmission of
data files or messages may be delayed until such a connection
is available. Ensure the above separation distance instructions
are followed until the transmission is completed.

Medical devices

Operation of any radio transmitting equipment, including
wireless phones, may interfere with the functionality of
inadequately protected medical devices. Consult a physician
or the manufacturer of the medical device to determine if they
are adequately shielded from external RF energy or if you have
any questions. Switch off your device in health care facilities
when any regulations posted in these areas instruct you to do
so. Hospitals or health care facilities may be using equipment
that could be sensitive to external RF energy.

background image

A d d i t i o n a l s a f e t y i n f o r m a t i o n

100

Pacemakers

Pacemaker manufacturers recommend that a minimum
separation of 15.3 centimeters (6 inches) be maintained
between a wireless device or phone and a pacemaker to
avoid potential interference with the pacemaker. These
recommendations are consistent with the independent
research by and recommendations of Wireless Technology
Research. To minimize the potential for interference, persons
with pacemakers should do the following:

Always keep the device more than 15.3 centimeters
(6 inches) from their pacemaker when the device is
switched on

Not carry the device in a breast pocket

Hold the device to the ear opposite the pacemaker to
minimize the potential for interference.

If you have any reason to suspect that interference is taking
place, switch off your device immediately.

Hearing aids

Some digital wireless devices may interfere with some hearing
aids. If interference occurs, consult your service provider.

Vehicles

RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles such as electronic
fuel injection systems, electronic antiskid (antilock) braking
systems, electronic speed control systems, and air bag systems.
For more information, check with the manufacturer or its
representative of your vehicle or any equipment that has
been added.

background image

A d d i t i o n a l s a f e t y i n f o r m a t i o n

101

Only qualified personnel should service the device, or install
the device in a vehicle. Faulty installation or service may be
dangerous and may invalidate any warranty that may apply to
the device. Check regularly that all wireless device equipment
in your vehicle is mounted and operating properly. Do not store
or carry flammable liquids, gases, or explosive materials in the
same compartment as the device, its parts, or enhancements.
For vehicles equipped with an air bag, remember that an air
bags inflate with great force. Do not place objects, including
installed or portable wireless equipment in the area over the
air bag or in the air bag deployment area. If in-vehicle
wireless equipment is improperly installed and the air bag
inflates, serious injury could result.

Using your device while flying in aircraft is prohibited. Switch
off your device before boarding an aircraft. The use of wireless
teledevices in an aircraft may be dangerous to the operation
of the aircraft, disrupt the wireless telephone network, and
may be illegal.

Potentially explosive environments

Switch off your device when in any area with a potentially
explosive atmosphere and obey all signs and instructions.
Potentially explosive atmospheres include areas where you
would normally be advised to turn off your vehicle engine.
Sparks in such areas could cause an explosion or fire resulting
in bodily injury or even death. Switch off the device at refueling
points such as near gas pumps at service stations. Observe
restrictions on the use of radio equipment in fuel depots, storage,
and distribution areas; chemical plants; or where blasting
operations are in progress. Areas with a potentially explosive
atmosphere are often but not always clearly marked. They
include below deck on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas (such as
propane or butane), and areas where the air contains
chemicals or particles such as grain, dust, or metal powders.

background image

A d d i t i o n a l s a f e t y i n f o r m a t i o n

102

Failure to observe these instructions may lead to suspension
or denial of telephone services to the offender, legal action,
or both.

Emergency calls

Important: Wireless phones, including this device,
operate using radio signals, wireless networks,
landline networks, and user-programmed functions.
Because of this, connections in all conditions cannot
be guaranteed. You should never rely solely on any
wireless device for essential communications like
medical emergencies.

To make an emergency call, make sure your device is properly
charged before attempting any emergency calls. If your battery
becomes empty, you cannot receive or make calls, including
emergency calls and must wait a few minutes after the charging
begins to place your call.

1. If the device is not on, switch it on. Check for adequate

signal strength.

2. Press the end key as many times as needed to clear the

display and ready the device for calls.

3. Enter the official emergency number for your present

location, and press the send key. Emergency numbers
vary by location.

If certain features are in use, you may first need to turn those
features off before you can make an emergency call. If the
device is in an offline or flight mode you must change the
profile to activate the device function before you can make an
emergency call. Consult this guide or your service provider.
When making an emergency call, give all the necessary
information as accurately as possible. Your wireless device
may be the only means of communication at the scene of an
accident. Do not end the call until given permission to do so.

background image

A d d i t i o n a l s a f e t y i n f o r m a t i o n

103

Certification information (SAR)

This mobile device meets guidelines for exposure to radio waves.

Your mobile device is a radio transmitter and receiver. It is
designed not to exceed the limits recommended by international
guidelines. These guidelines were developed by the independent
scientific organization ICNIRP and include safety margins
designed to assure the protection of all persons, regardless
of age and health.

The exposure guidelines for mobile devices employ a unit of
measurement known as the Specific Absorption Rate or SAR.
The SAR limit set by ICNIRP is 2.0 watts/kilogram (W/kg)
averaged over 10 grams of tissue. Tests for SAR are conducted
using standard operating positions with the device transmitting
at its highest certified power level in all tested frequency bands.
The actual SAR level of an operating device can be well below
the maximum value because the device is designed to use
only the power required to reach the network. That amount
changes depending on a number of factors such as how close
you are to a network base station. The highest SAR value when
tested according to international testing procedures for use
at the ear is 0.87 W/kg.

Use of device accessories and enhancements may result in
different SAR values. SAR values may vary depending on
national reporting and testing requirements and the network
band. Additional SAR information may be provided under
product information at www.nokia.com.

Your mobile device is also designed to meet the requirements
for exposure to radio waves established by the Federal
Communications Commission (USA) and Industry Canada.
These requirements set a SAR limit of 1.6 W/kg averaged over
one gram of tissue. The highest SAR value reported under this
standard during product certification for use at the ear is
1.30 W/kg and when properly worn on the body is 0.76 W/kg.

background image

A d d i t i o n a l s a f e t y i n f o r m a t i o n

104

Information about this device can be found on the FCC's
website at http://www.fcc.gov/oet/fccid by searching the
equipment authorization system using FCC ID: QMNRM-155.

Hearing aid compatibility (HAC)

Your mobile device model complies with FCC rules governing
hearing aid compatibility. These rules require an M3
microphone or higher value. The M-value, shown on the device
box, refers to lower radio frequency (RF) emissions. A higher
M-value generally indicates that a device model has a lower
RF emissions level, which may improve the likelihood that the
device will operate with certain hearing aids. Some hearing
aids are more immune than others are to interference. Please
consult your hearing health professional to determine the
M rating of your hearing aid and whether your hearing aid
will work with this device. More information on accessibility
can be found at www.nokiaaccessibility.com.

Technical information

Dimensions: Width 1.69 inches, Length 3.20 inches,
Depth 0.94 inch

Weight: < 3.70 ounces with BL-5B Li-Ion Battery

Wireless networks: 1900/800 MHz CDMA

Frequency range (Tx): PCS 1851.25–1908.75 MHz;
Cellular 824.70–848.37 MHz

Frequency range (Rx): PCS 1931.25–1988.75 MHz;
Cellular 869.70–893.37 MHz

Bluetooth: 2402.0 - 2480.0 MHz

GPS: 1575 MHz

background image

A d d i t i o n a l s a f e t y i n f o r m a t i o n

105

Battery information

This section provides information about battery charging times
with the Travel Charger (AC-4UZ), the Mobile Charger,
talk-times, and standby times. Be aware that the information
in this section is subject to change. For more information,
contact your service provider.

Talk and standby times

Operation times are estimates only and depend on signal
strength, phone use, network conditions, features used,
battery age and condition (including charging habits),
temperatures to which the battery is exposed, and many
other factors.

background image

I n d e x

106